Author Topic: New Coin Box Redesign Suggestions  (Read 2264 times)

0 Members and 1 Guest are viewing this topic.

Offline KeepOnTrying!

  • Supporter
  • Trade Count: (+23)
  • Hero Member
  • *****
  • Posts: 1608
  • Karma: 50
  • Gender: Male
New Coin Box Redesign Suggestions
« on: April 11, 2015, 12:00:45 PM »
I wish to propose the following and hope that people who come across this writeup can somehow convey the idea back to not only the China based mints but all other world mints. It is quite simple and has already been done to some extent in at least one instance. The coin boxes being made up till now (>99%) are only designed to hold the ungraded coin usually in the OMP. Granted that manufacture of these boxes is based on designs that originated before grading and coin enclosure in slabs became popular, they now need to be changed to serve the dual purpose of holding an ungraded coin in its OMP but also to still be useful after the coin is graded.

The lack of this dual function serves to make these coin boxes largely redundant and can explain to some extent why coin boxes have been thrown away by their owners over the years. Even when they are kept they clutter the whole place and may be difficult to match back to their separately stored slabbed coin especially in large collections! Even the exquisitely designed boxes have not been spared this fate. And we are now acknowledging that many heirloom coin boxes have been lost this way.

I acknowledge the fact that some collectors may move their coins into coin or slab albums for easy viewing, collation and display, but the display function can also be incorporated into the coin box re-design.

I specifically propose that two cutouts be made in the box for holding the coin (circular cutout for circular coins and OMP as usual, should be made deeper) and a rectangular cutout for a future slabbed coin if/and when it graded. Given slightly differing slab dimensions from various grading companies (NGC, PCGS, ANACS, China based grading companies etc) a generic one-size-fit-all cutout will be necessary as is already done for some multi-slab holders and albums. The overall dimensions of the box may need to be changed in some cases.

Coins can be sold initially with only the (usually) circular hole present. In this design variant the rectangular cutout is almost complete but held in place by 3mm tags at the four edges. These tags can be easily snipped and the rectangular pre-cut cutout pulled out when the slabbed coin returns from grading. I'll try and draw this later and post if I have time but I believe the idea is straight forward.

This change in box design does not need to cost more. There could even be cost savings due to material saved by increasing the cutout space. If it is going to cost slightly more I am quite sure the additional cost (?50 cents US/box) will still be low compared to what we now pay to buy a new single unit slab holding/display box.

As an example of what I am proposing look at the first batch of 2015 FUN Show reverse proof Panda medal boxes that were released at the beginning with already graded and slabbed medals. A mint packaging company only needs to place a circular cutout space in the middle of the rectangular slab holding area for the OMP coin/medal.

To rehash, a slight change in the current coin box design will allow more coins to be left housed in their original boxes even after they return from grading and slabbing. I am not proposing that all coins be slabbed; that is a different discussion.

Please if you are connected to the coin/medal minting and packaging industry discuss this with the decision makers and hopefully implement these changes in the current form or modified as seen fit. I think it makes sense. I don't hold any copyright to this idea. It may not even be original! But it does not matter. Just think about it and do it! Thank you!

(Please note that I shall post this at other forums I belong to for wider coverage and discussion). Thanks again.
KeepOnTrying and Never Give Up!
That lion is also after you!

Offline KeepOnTrying!

  • Supporter
  • Trade Count: (+23)
  • Hero Member
  • *****
  • Posts: 1608
  • Karma: 50
  • Gender: Male
Re: New Coin Box Redesign Suggestions
« Reply #1 on: October 25, 2015, 04:00:14 PM »
New Coin/Slab Box by Dragonzeng168

Dragonzeng168 has developed a luxury combination coin and slab holder box. I previously proposed such a box which will serve the dual function of holding a coin in OMP and later on a graded and slabbed coin. Classical innovation from private business whilst the mints are still dragging their feet!

Conflict of Interest Statement
I have no financial interest in Dragon’s product. I am just happy with the innovation. There are other slab holding boxes out there but this is the first combo box I have seen so far.
KeepOnTrying and Never Give Up!
That lion is also after you!

Offline KeepOnTrying!

  • Supporter
  • Trade Count: (+23)
  • Hero Member
  • *****
  • Posts: 1608
  • Karma: 50
  • Gender: Male
Re: New Coin Box Redesign Suggestions
« Reply #2 on: October 25, 2015, 10:17:54 PM »
This link pulls up a previous post on containerization of slabs with pickling jars. This is IMO an excellent example of affordable airtight storage of coins.

http://china-mint.info/forum/index.php?topic=11733.msg68360#msg68360
KeepOnTrying and Never Give Up!
That lion is also after you!